메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
홍석우 (성균관대학교) 박수 (성균관대학교) 석창성 (성균관대학교) 구재민 (성균관대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2016년도 학술대회
발행연도
2016.12
수록면
1,775 - 1,778 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Usually, for the fatigue life estimation of real pipe, the 3 or 4 point bending fatigue test is used. However, there is a disadvantage that the sufficiently long pipe is needed. Also, the general bending fatigue test for real pipe is good for stress ratio over 0 conditions, however, but the complicate and large test system is needed for stress ratio under 0 conditions. For these reason, in this study, the fatigue test system for short pipe, the stress ratio R=-1 was designed and produced, and the fatigue test was performed with wall-thinned real pipe. During the fatigue test, the initiation crack occurred in wall-thinned part of pipe with the maximum stress. The crack propagated and fractured finally. The load factor correcting the effect of the structure of test system was obtained and the fatigue test stresses were corrected by applying the load factor to fatigue data. Therefore, if the length of pipe is short, the device developed in this study can be used for the fatigue test of real pipe.

목차

Abstract
1. 서론
2. 시험방법 및 시험장치
3. 피로시험 및 시험결과
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-550-002049774