메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강민규 (Pukyong National University) 서우진 허인성 유영문 (Pukyong National University) 최희락 (Pukyong National University)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제31권 제2호
발행연도
2017.2
수록면
1 - 10 (10page)
DOI
10.5207/JIEIE.2017.31.2.001

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, the effect of thermal transfer depending on the filling ratio of working fluid in heat spreader was studied. The heat spreaders were filled with working fluid (acetone) rate of 0%, 5%, 15% and 40%, respectively. The temperature distribution according to the thermal transfer direction was measured. Finally the thermal transfer was analyzed for four different filling rates of working fluid and four different LED COB input powers of 5W, 10W, 15W, 20W. Then, the thermal resistivity and thermal transfer coefficients of heat spreaders were calculated. In result, it was found that heat spreader with 15% of filling rate was most effective in terms of the thermal transfer property, which are 0.49∼0.64K/W of thermal resistivity and 2071∼2719W/㎡K of thermal transfer coefficient.

목차

Abstract
1. 서론
2. 이론적 고찰
3. 실험 방법
4. 실험 결과 및 고찰
5. 결론 및 고찰
References

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-565-002187987