메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
진상범 (Hanbat National University) 김근수 (Korea Institute of Machinery) 백승욱 (Korea Research Institute of Standards and Science) 김현석 (Chungnam National University) 강현일 (Hanbat National University) 최원석 (Hanbat National University) 김정현 (Hanbat National University)
저널정보
한국신재생에너지학회 신·재생에너지 신재생에너지 제13권 제2호 (통권 제52호)
발행연도
2017.6
수록면
50 - 58 (9page)
DOI
10.7849/ksnre.2017.6.13.2.050

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this study, linear typed nanofibers were fabricated by controlling the variables with the great effects on nanofiber fabrication and the microstructural properties of fabricated nanofibers were investigated as a preliminary step to serve as a carrier, including SmBa<SUB>0.5</SUB>Sr<SUB>0.5</SUB>Co<SUB>2</SUB>O<SUB>5+d</SUB> (SBSCO) cathode materials for low temperature-operating solid oxide fuel cells (LT-SOFCs). Beadless nanofibers were produced at a nozzle to substrate distance of at least 9 cm when using the electrospinning process. The diameter of the nanofibers increased with increasing flow rate, and the diameter of the nanofibers also increased at a nozzle to substrate distance of 9cm or more. As the humidity increased, collapse of the nanofibers was observed. The fabricated nanofibers, as a carrier for SBSCO, were decomposed in three parts: a temperature range of RT~340°C, 340°C~454°C, and higher than 454°C. No further weight losses were observed at temperatures higher than 625°C. The lowest area specific resistance (ASR) was observed when SBSCO was used in the nanofiber type and the SBSCO nanofiber exhibited an ASR value of 0.85 Ω.cm<SUP>2</SUP>at 550°C.

목차

ABSTRACT
1. 서론
2. 실험방법
3. 결과 및 고찰
4. 결론
References

참고문헌 (14)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0