메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이길봉 (한국에너지기술연구원) 이범준 (한국에너지기술연구원) 왕은석 (한국에너지기술연구원) 나호상 (한국에너지기술연구원) 조준현 (한국에너지기술연구원) 백영진 (한국에너지기술연구원) 신형기 (한국에너지기술연구원) 이영수 (한국에너지기술연구원)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2018년도 4개지회 연합학술대회 강연 및 논문집
발행연도
2018.5
수록면
41 - 44 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
Researches to reutilize waste heat from industrial processes have gained a lot of interest, recently. Steam is the most preferred heat source in industrial processes. Therefore the heat pump which reproduce waste heat as process steam, can give a high energy saving effect. To produce steam, the heat pumps should have operating points of 100℃ or higher. To meet this operation range, R245fa refrigerant-based cycle was developed to reduce condensation pressure. In addition, by implementing flashing steam production technology, the average temperature difference in high pressure heat exchanger was reduced resulting system efficiency improvement. In 2017, prototype products that produce 0.5 tons of steam per hour was developed and it achieved world-class performance. To implement the system into the industrial processes, control logic that reflects the characteristics of the flashing process, in which the condensate circulation flow rate and the steam production flow rate are inconsistent, has been developed. Demonstration site was constructed in one domestic chemical plant.

목차

Abstract
1. 연구배경 및 목적
2. 산업용 저압스팀 생산 고온히트펌프 개발
3. 스팀히트펌프 실증사이트 구축
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0