지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2018.12
- 수록면
- 44 - 50 (7page)
- DOI
- 10.9726/kspse.2018.22.6.044
이용수
초록· 키워드
오류제보하기
As a type of bolt with a spherical head, the ball stud is widely used as a part of a ball joint in steering or suspension systems in automobiles. Balls and studs are subjected to heat treatment suitable for each material; in particular, the shear strength of the ball stud must meet the specifications of the production company. This study evaluated the shear strength of joints according to the cooling method of ball studs subject to resistance welding. The shear stress of water cooling was higher than that of air cooling (as-received material). Note, however, th a t oil cooling showed lower stress than that of as-received. When judged by standard deviation, mean, and coefficient of variation according to the arithmetic statistics and shape parameter as well as scale parameter, oil cooling is suitable.
목차
Abstract
1. Introduction
2. Materials and Testing method
3. Results and Review
4. Conclusions
참고문헌 (20)
참고문헌 신청
[학술지(정기간행물)] - J. H. Song / 1999 / Development of the Process Design System for a Ball Stud / Transactions of the Korean Society of Mechanical Engineers A 23 (10) : 1646 ~ 1657
[학술대회논문] - J. J. Lee / 2012 / Study of Mechanical Special Quality by Ball Stud Processing Method / Proceeding of The Korean Society of Manufacturing Process Engineers 2012 Spring Annual Meeting : 42 ~
[학술지(정기간행물)] - H. Paul / 2008 / Steering systems with steel housings in passenger cars and light commercial vehicles / T Z Worldwide 100 (9) : 12 ~ 16
[학술지(정기간행물)] - Y. Z. Itoh / 1989 / Prediction of fatigue crack growth rate in welding residual stress field / Engineering Fracture Mechanics 33 (3) : 397 ~ 407
[학술지(정기간행물)] - T. L. Teng / 2001 / Analysis of residual stresses and distortions in T-joint fillet welds / International Journal of Pressure Vessels and Piping 78 (8) : 523 ~ 538
[학술대회논문] - J. J. Lee / 2012 / Study of Mechanical Special Quality by Ball Stud Processing Method / Proceeding of The Korean Society of Manufacturing Process Engineers 2012 Spring Annual Meeting : 42 ~
[학술지(정기간행물)] - H. Paul / 2008 / Steering systems with steel housings in passenger cars and light commercial vehicles / T Z Worldwide 100 (9) : 12 ~ 16
[학술지(정기간행물)] - Y. Z. Itoh / 1989 / Prediction of fatigue crack growth rate in welding residual stress field / Engineering Fracture Mechanics 33 (3) : 397 ~ 407
[학술지(정기간행물)] - T. L. Teng / 2001 / Analysis of residual stresses and distortions in T-joint fillet welds / International Journal of Pressure Vessels and Piping 78 (8) : 523 ~ 538
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
냉각 방법에 따른 볼스터드의 전단강도
대한기계학회 춘추학술대회
2017 .11
-
Experimental and numerical study on static behavior of grouped large-headed studs embedded in UHPC
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental study on the hybrid shear connection using headed studs and steel plates
Steel and Composite Structures, An International Journal
2020 .01
-
Push-out tests on stud shear connectors with constrained structure of steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2022 .09
-
Shear capacity of stud shear connectors with initial damage: Experiment, FEM model and theoretical formulation
Steel and Composite Structures, An International Journal
2017 .01
-
Review of stud shear resistance prediction in steel-concrete composite beams
Steel and Composite Structures, An International Journal
2018 .01
-
Analytical performance evaluation of modified inclined studs for steel plate concrete wall subjected to cyclic loads
Computers and Concrete, An International Journal
2016 .01
-
Study on uplift performance of stud connector in steel-concrete composite structures
Steel and Composite Structures, An International Journal
2015 .01
-
Bond-slip effect in steel-concrete composite flexural members: Part 2 ‒ Improvement of shear stud spacing in SCP
Steel and Composite Structures, An International Journal
2019 .01
-
Design models for predicting shear resistance of studs in solid concrete slabs based on symbolic regression with genetic programming
Steel and Composite Structures, An International Journal
2022 .05
-
CD Stud 용접에 미치는 Insultation Pin 형상에 관한 연구
대한용접학회 특별강연 및 학술발표대회 개요집
2019 .11
-
Experimental studies on the behaviour of headed shear studs for composite beams in fire
Steel and Composite Structures, An International Journal
2019 .01
-
C-스터드 이격용 클립을 적용한 석고보드 건식벽체 시스템의 단열 및 구조성능 평가
KIEAE Journal
2022 .04
-
FE validation of the equivalent diameter calculation model for grouped headed studs
Steel and Composite Structures, An International Journal
2018 .01
-
Shear stiffness of headed studs on structural behaviors of steel-concrete composite girders
Steel and Composite Structures, An International Journal
2020 .01
-
Experimental investigation of shear connector behaviour in composite beams with metal decking
Steel and Composite Structures, An International Journal
2020 .01
-
장척이형철근의 스터드 용접조건 도출 및 용접변수의 영향
대한용접학회 특별강연 및 학술발표대회 개요집
2016 .04
-
볼스터드 검사장치의 설계 및 시제품 제작
한국기계기술학회지
2019 .01
-
Experimental and numerical studies on the shear connectors in steel-concrete composite beams at fire and post fire exposures
Steel and Composite Structures, An International Journal
2021 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-550-000309499