지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 대한치과보철학회 The Journal of Advanced of Prosthodontics The Journal of Advanced of Prosthodontics 제9권 제1호
- 발행연도
- 2017.1
- 수록면
- 1 - 13 (13page)
이용수
초록· 키워드
오류제보하기
PURPOSE. The purpose of this study was to compare the fit of cast gold crowns fabricated from the conventional and the digital impression technique.
MATERIALS AND METHODS. Artificial tooth in a master model and abutment teeth in ten patients were restored with cast gold crowns fabricated from the digital and the conventional impression technique. The forty silicone replicas were cut in three sections; each section was evaluated in nine points. The measurement was carried out by using a measuring microscope and I-Soultion. Data from the silicone replica were analyzed and all tests were performed with α-level of 0.05.
RESULTS. 1. The average gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly. 2. In marginal and internal axial gap of cast gold crowns, no statistical differences were found between the two impression techniques. 3. The internal occlusal gaps of cast gold crowns fabricated from the digital impression technique were larger than those of the conventional impression technique significantly.
CONCLUSION. Both prostheses presented clinically acceptable results with comparing the fit. The prostheses fabricated from the digital impression technique showed more gaps, in respect of occlusal surface.
목차
등록된 정보가 없습니다.
참고문헌 (28)
참고문헌 신청
[학술지(정기
Christensen GJ / 1966 / Marginal fit of gold inlay castings / J Prosthet Dent 16 : 297 ~ 305
Christensen GJ / 2005 / The state of fixed prosthodontic impressions:room for improvement / J Am Dent Assoc 136 : 343 ~ 346
Christensen GJ / 2009 / Impressions are changing: deciding on conventional, digital or digital plus in-office milling / J Am Dent Assoc 140 : 1301 ~ 1304
Council on dental materials and devices / 1978 / Revised American national standards institute/American dental association specification no. 8 for zinc phosphate cement / J
Christensen GJ / 1966 / Marginal fit of gold inlay castings / J Prosthet Dent 16 : 297 ~ 305
Christensen GJ / 2005 / The state of fixed prosthodontic impressions:room for improvement / J Am Dent Assoc 136 : 343 ~ 346
Christensen GJ / 2009 / Impressions are changing: deciding on conventional, digital or digital plus in-office milling / J Am Dent Assoc 140 : 1301 ~ 1304
Council on dental materials and devices / 1978 / Revised American national standards institute/American dental association specification no. 8 for zinc phosphate cement / J
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
디지털 방식을 이용하여 제작한 전부 지르코니아 수복물의 변연 적합도 평가
대한치과의사협회지
2018 .06
-
Evaluation of marginal adaptation in three-unit frameworks fabricated with conventional and powder-freedigital impression techniques
The Journal of Advanced of Prosthodontics
2019 .01
-
A Digital Approach to a Definitive Immediate Denture : A Clinical Report
Journal of Korean Dental Science
2016 .12
-
성공적인 총의치 제작을 위한 단계별 포인트 : 무치악인상채득, 이것이 핵심이다
대한치과의사협회지
2017 .01
-
Accuracy of new implant impression technique using dual arch tray and bite impression coping
The Journal of Advanced of Prosthodontics
2018 .01
-
Investigation of the effects of storage time on the dimensional accuracy of impression materials using cone beam computed tomography
The Journal of Advanced of Prosthodontics
2016 .01
-
구강 스캐너 임상적용 경험에 따른 치과위생사의 인식 연구: 전통적 인상채득과의 비교를 중심으로
대한치과의료관리학회지
2022 .12
-
Modeling Compound to Rigidly Seal the Occlusal Window on Open Trays for Multiunit Implant Impression
대한구강악안면임플란트학회지
2021 .09
-
Comparison of different digital shade selection methodologies in terms of accuracy
The Journal of Advanced of Prosthodontics
2024 .02
-
Accuracy of digital and conventional dental implant impressions for fixed partial dentures: A comparative clinical study
The Journal of Advanced of Prosthodontics
2019 .01
-
Adaptation of zirconia crowns created by conventional versus optical impression: in vitro study
The Journal of Advanced of Prosthodontics
2017 .06
-
Comparison of different impression techniques for edentulous jaws using three-dimensional analysis
The Journal of Advanced of Prosthodontics
2019 .01
-
Accuracy of casts produced from conventional and digital workflows: A qualitative and quantitative analyses
The Journal of Advanced of Prosthodontics
2019 .01
-
Stress-Related Changes to the Autonomous Neural System While Alginate Impression-Taking
한국임상치위생학회지
2020 .01
-
Evaluation of digital dental models obtained from dental cone-beam computed tomography scan of alginate impressions
대한치과교정학회지
2016 .05
-
A simple and effective method for addition silicone impression disinfection
The Journal of Advanced of Prosthodontics
2019 .01
-
디지털 인상법과 전통적 인상법의 정확도 비교: 체계적 고찰
대한치과보철학회지
2018 .01
-
Effectiveness of the novel impression tray “cleftray” for infants with cleft lip and palate: a randomized controlled clinical trial
대한구강악안면외과학회지
2021 .04
-
Accuracy of a separating foil impression using a novel polyolefin foil compared to a custom tray and a stock tray technique
The Journal of Advanced of Prosthodontics
2017 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0