메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
차동안 (한국생산기술연구원) 배성우 (전북대학교) 김선창 (한국생산기술연구원) 김진혁 (한국생산기술연구원) 김대해 (한국생산기술연구원) 박찬우 (전북대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2019년도 하계학술발표대회 논문집
발행연도
2019.6
수록면
961 - 964 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The objective of this paper is to evaluate the performance of decompression dryer applied heat pump. Dryers are widely used in the industrial process. In this study, we was measured the weight of dry material and power consumption according to pressure conditions. A total of 24 trays were put into the dryer. Load cell was used for each tray and pressure switch was used for pressure control. Pressure conditions are atmospheric pressure, -0.2 bar, -0.4 bar and dryer operating time is 24hours. The dry weight was measured in real time to make a drying curve. Drying for 4 hours was followed by constant rate drying, followed by drying with falling drying rate. During the constant drying period, about 50% of the total dry weight was dried. As the pressure in the drying chamber decreased, the drying rate and power consumption were high.

목차

Abstract
1. 서론
2. 실험장치 및 성능평가
3. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-553-000237849