지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.1
- 수록면
- 1,436 - 1,447 (12page)
이용수
초록· 키워드
오류제보하기
In the present study, the main purpose is to detect the most key factors of shot peening (SP) process on the microhardness,grain size, and residual stress of AISI 1060 high carbon steel. The specimens were treated using various types of SP processnamely conventional shot peening and severe shot peening. Several experiments were performed to study metallurgical andmechanical properties of AISI 1060 steel. Almen intensity and surface coverage from one side and microhardness, grainsize, and residual stress from the other side were considered as input and output parameters for the design of experimentmethodology, respectively. The L18(21 and 31) mixed level of Taguchi orthogonal array design was used to study all cases. The test results were investigated by signal-to-noise ratio formula. It was identified that the surface coverage is the most keyfactors for shot peening process considering the affected depth. Also, the effect of this parameter on the microhardness, grainsize and residual stress was obtained approximately 68, 89 and 57%, respectively. Eventually, the results obtained from allTaguchi sensitivity analysis indicated that it would be better to adjust the surface coverage factor in comparison with Almenintensity factor in order to create the surface compressive residual stress on the material and consequently to increase thefatigue lifetime of component using shot peening treatment.
목차
등록된 정보가 없습니다.
참고문헌 (49)
참고문헌 신청
A. M. Abrão / 2014 / The influence of deep rolling on the surface integrity of AISI 1060high carbon steel / Procedia CIRP 13:31~36
A. M. Abrão / 2014 / The influence of heat treatment and deep rolling on the mechanical properties and integrity of AISI 1060 steel / J. Mater. Process. Technol 214:3020~3030
L. Judong / 2012 / Experimental Study on Grinding-hardening of 1060 Steel / Energy Procedia 16:103~108
A. Hadi / 2017 / Reference Module in Materials Science and Materials Engineering / Elsevier :1~12
O. Unal / 2019 / Plasma nitriding of gradient structured AISI 304 at low temperature : shot peening as a catalyst treatment / Vacuum 164:194~197
A. M. Abrão / 2014 / The influence of heat treatment and deep rolling on the mechanical properties and integrity of AISI 1060 steel / J. Mater. Process. Technol 214:3020~3030
L. Judong / 2012 / Experimental Study on Grinding-hardening of 1060 Steel / Energy Procedia 16:103~108
A. Hadi / 2017 / Reference Module in Materials Science and Materials Engineering / Elsevier :1~12
O. Unal / 2019 / Plasma nitriding of gradient structured AISI 304 at low temperature : shot peening as a catalyst treatment / Vacuum 164:194~197
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
항공용 구조물의 신뢰성 향상을 위한 숏피닝 공정 최적화 연구
신뢰성응용연구
2017 .12
-
Shot Peening Process Effects on Metallurgical and Mechanical Properties of 316 L Steel via: Experimental and Neural Network Modeling
Metals and Materials International
2021 .01
-
Optimization of Shot Peening Effective Parameters on Surface Hardness Improvement
Metals and Materials International
2021 .09
-
Prediction of real peening residual stress by multi-shot random impact using combined discrete-finite element analysis model
대한기계학회 춘추학술대회
2022 .11
-
Dynamic numerical simulation of plastic deformation and residual stress in shot peening of aluminium alloy
Structural engineering and mechanics : An international journal
2017 .01
-
하모닉 감속기용 소재의 Shot-peening 표면처리 공정조건에 따른 잔류응력층 및 기계적특성 변화
한국소성가공학회 학술대회 논문집
2023 .05
-
스프링강 표면 내구수명 향상을 위한 온간 피닝 공정의 유한요소 해석
신뢰성응용연구
2018 .03
-
Modelling Residual Stresses in Shot-Peened Magnesium Alloys: A Hybrid Method
Metals and Materials International
2022 .10
-
Al7075-T6의 압축잔류응력 및 피로 수명에 미치는 재피닝의 효과
한국생산제조학회지
2016 .08
-
A Study on Shot-Peening Effect for Fatigue Life Improvement of Repair Welds in Marine Propeller
대한용접학회 특별강연 및 학술발표대회 개요집
2017 .11
-
Analysing the Fatigue Behaviour and Residual Stress Relaxation of Gradient Nano-Structured 316L Steel Subjected to the Shot Peening via Deep Learning Approach
Metals and Materials International
2022 .01
-
쇼트 피닝 세기에 따른 Co-Cr 합금의 부식 특성
한국정밀공학회 학술발표대회 논문집
2018 .05
-
쇼트피닝 가공 Ti-6Al-4V의 추가 표면 가공에 따른 부식 저항
한국생산제조학회지
2018 .04
-
Effect of Shot Peening on Fatigue Crack Growth Retardation in Stainless Steel with Compressive Residual Stress
대한기계학회 춘추학술대회
2024 .11
-
The Solution of Peening Residual Stress by Angled Impact of Multi Elliptical Shot Ball Based on Finite Element Analysis
Journal of the Korean Society for Precision Engineering
2017 .02
-
The Effect of Shot Peening on the Fatigue Life of Hydrogen Embrittled Stainless Steel in Thermal Environment
대한기계학회 춘추학술대회
2024 .11
-
Effects of Conventional and Severe Shot Peening on Residual Stress and Fatigue Strength of Steel AISI 1060 and Residual Stress Relaxation Due to Fatigue Loading: Experimental and Numerical Simulation
Metals and Materials International
2021 .01
-
Laser Peening: A Review of the Factors, Effects, Applications, Comparison with Shot Peening and State-of-the-Art
Metals and Materials International
2024 .02
-
항공엔진용 소재의 Shot peening 피로특성 평가
한국소성가공학회 학술대회 논문집
2021 .11
-
Influences of Shot Peening Parameters on Mechanical Properties and Fatigue Behavior of 316 L Steel: Experimental, Taguchi Method and Response Surface Methodology
Metals and Materials International
2021 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0