본 연구에서는 지르코니아 코어 세라믹에 포세린을 축성하지 않고 모의 소성 시 냉각 속도의 차이가 지르코니아의 광학적 특성에 미치는 영향을 알아보았다. 그 결과 포세린 모의소성시 냉각속도에 따른 지르코니아의 평균 투과율의 유의차는 나타나지 않았다(p>0.05). 모든 군에서 시편 두께가 0.51 mm에서 2.0 mm로 증가할수록 평균 투과율은 약 44%에서 약 28%로 감소하였다(p<0.001). 포세린 모의소성시 냉각속도에 따른 지르코니아의 반투명도 매개변수의 차이는 없었다(p>0.05). 모든 군에서 시편 두께가 0.51 mm에서 2.0 mm로 증가할수록 반투명 매개변수는 약 16에서 약 5로 감소하였다(p<0.001). 포세린 모의소성시 냉각속도에 따른 지르코니아의 유백광도 매개변수의 차이는 없었다(p>0.05). 모든 군에서 시편 두께가 0.51 mm에서 2.0 mm로 증가할수록 유백광도 매개변수는 약 6에서 약 11로 증가하였다(p<0.001). 이상으로부터 포세린 모의소성시 냉각속도에 상관없이 모든 시험군에서 두께가 증가할수록 평균 투과율과 반투명도 매개변수는 지수함수적으로 감소하였으며 유백광도 매개변수는 포물선적으로 증가하였다. 따라서 본 연구의 한계내에서 지르코니아 코어를 사용한 보철물의 제작시 제조사에 의해 제공되는 일반적인 냉각속도보다 높거나 낮은 냉각속도로 포세린을 소성하더라도 지르코니아의 광학적특성에는 큰 영향을 주지 않을 것으로 생각된다.
This study investigated the effect of the difference in the cooling rates on the optical properties of zirconia during the simulated firing of porcelain, without a porcelain layer on a zirconia core ceramic. No difference was observed in the average transmittance of zirconia with the cooling rate during simulated firing (p>0.05). In all groups, the average transmittance decreased from approximately 44% to approximately 28% (p<0.001) as the thickness increased from 0.51 mm to 2.0 mm. No difference was observed in the translucency and opalescence parameters of zirconia with the cooling rate during the simulated firing of porcelain (p>0.05). In all groups, the translucency decreased from approximately 16 to approximately 5 (p<0.001), while the opalescence increased from approximately 6 to approximately 11 (p<0.001) as the thickness increased from 0.51 mm to 2.00 mm. Thus, the average transmittance and translucency parameter decreased exponentially as the thickness increased in all groups regardless of the cooling rate during simulated porcelain firing, while the opalescence parameter increased in a parabolic manner. Therefore, in this study, even if porcelain is fired at a cooling rate higher or lower than the typical cooling rate when manufacturing a prosthesis with a zirconia core, the optical properties of zirconia are not expected to be significantly affected.