메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김형주 (Sungkyunkwan University) 김광호 (Sungkyunkwan University) 박민혜 (Dept. of KEPCO Research Institute) 심선주 (Dept. of KEPCO Research Institute) 최종기 (Dept. of KEPCO Research Institute) 나완수 (Sungkyunkwan University)
저널정보
대한전기학회 전기학회논문지 전기학회논문지 제71권 제5호
발행연도
2022.5
수록면
766 - 775 (10page)
DOI
10.5370/KIEE.2022.71.5.766

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents a measurement setup and network parameter-based analysis methodology for high-frequency transmission characteristics analysis between the primary and secondary sides of a PT (potential transformer). The raw data was extracted by measuring a scattering parameter (S-parameter) using a vector network analyzer. ABCD parameters were obtained using the measurement data to analyze the transmission characteristics of the transformer, and the source-transformer-load model was introduced to define the voltage and current gains considering the terminating impedance and input impedance applied to the transformer. Representative sine wave and square wave was applied to analyze the high-frequency transmission characteristics. In order to analyze the surge transmitted to the secondary system when applied to the actual system, the waveform of the IEC standard was generated and applied. When the load resistance is 1 MΩ, the voltage gain converted from the ideal turns ratio is applied to the input signal was confirmed that the maximum value of surge corresponding to about 1.9 times was formed.

목차

Abstract
1. 서론
2. GIS PT의 구조와 S 파라미터
3. PT의 ABCD 파라미터 및 이득 특성
4. Source-Transformer-Load 모델
5. PT의 써지 응답특성
6. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0