메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김신태 (서울시립대학교) 이성복 (롯데건설) 조현민 (포스코건설) 김명준 (서울시립대학교)
저널정보
한국건축친환경설비학회 한국건축친환경설비학회 논문집 한국건축친환경설비학회 논문집 제15권 제6호
발행연도
2021.12
수록면
714 - 722 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (7)

초록· 키워드

오류제보하기
In Korea, floor impact sound performance evaluation is performed through bang machine, rubber ball and tapping machine. As for the rubber ball, which is heavy &soft impact source, the operator is measuring the performance by free-falling from 1m, so there are concerns about the deviation in the result value. Therefore, a study was conducted to understand the experimental accuracy of the rubber ball that may occur during field measurement, and this study was conducted to analyze the repeatability and reproducibility of the rubber ball under field conditions. As a result of the repeatability test of the rubber ball, there was a difference of less than about 1.2 dB in the measured results for each operator. In addition, the standard deviation of 0.5 dB below 400 Hz occurred in the test results of the same operator. A standard deviation of 0.7 to 2.4 dB occurred in the frequency band above 400 Hz. As a result of the reproducibility test, there was about 1 dB of deviation for each institution depending on the measuring equipment and analysis method. Therefore, it is judged that is necessary to minimize the influence of external noise and to present clear setting conditions for measurement equipment and analysis methods in order to perform on-site measurement on the rubber ball more accurately.

목차

ABSTRACT
서론
실험개요
결과 및 토의
결론
References

참고문헌 (19)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2022-546-001338348