지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Objective: This study aimed to compare the mechanical and thermal properties in the anterior and posterior segments of new and retrieved specimens of a commercially available multizone superelastic nickel-titanium (NiTi) archwire. Methods: The following groups of 0.016 × 0.022-inch Bioforce NiTi archwires were compared: a) anterior and b) posterior segments of new specimens and c) anterior and d) posterior segments of retrieved specimens. Six specimens were evaluated in each group, by three-point bending and bend and free recovery tests. Bending moduli (Eb) were calculated. Furthermore, the new specimens were evaluated with scanning electron microscopy/energy-dispersive X-ray spectrometry. A multiple linear regression model with a random intercept at the wire level was applied for data analysis. Results: The forces in the posterior segments or new specimens were higher than those recorded in the anterior segments or retrieved specimens, respectively. Accordingly, Eb also varied. Higher austenite start and austenite finish (Af) temperatures were recorded in the anterior segments. No statistically significant differences were found for these temperatures between retrieved and new wires. The mean elemental composition was (weight percentage): Ni, 52.6 ± 0.5; Ti, 47.4 ± 0.5. Conclusions: The existence of multiple force zones was confirmed in new and retrieved Bioforce archwires. The retrieved archwires demonstrated lower forces during the initial stages of deactivation in three-point bending tests, compared with new specimens. The Af temperature of these archwires may lie higher than the regular intraoral temperature. Even at 2 mm deflections, the forces recorded from these archwires may lie beyond biologically safe limits.
목차
INTRODUCTION
MATERIALS AND METHODS
RESULTS
DISCUSSION
CONCLUSIONS
REFERENCES
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of archwire stiffness and friction on maxillary posterior segment displacement during anterior segment retraction : A three-dimensional finite element analysis
대한치과교정학회지
2019 .11
-
Effectiveness of medical coating materials in decreasing friction between orthodontic brackets and archwires
대한치과교정학회지
2021 .07
-
Effects of single-dose, low-level laser therapy on pain associated with the initial stage of fixed orthodontic treatment : A randomized clinical trial
대한치과교정학회지
2018 .03
-
Distalization pattern of whole maxillary dentition according to force application points
대한치과교정학회지
2015 .01
-
인접면 삭제와 변위-기반 접착술로 부착한 수용성 튜브를 이용한 절치 돌출의 교정 치료 : 증례보고
대한치과의사협회지
2017 .12
-
Finite element analysis of the effects of different archwire forms and power arm positions on maxillary incisors in en masse retraction using fixed lingual orthodontic appliances
대한치과교정학회지
2024 .09
-
Miniscrews versus surgical archwires for intermaxillary fixation in adults after orthognathic surgery
대한치과교정학회지
2015 .01
-
Effect of different combinations of bracket, archwire and ligature on resistance to sliding and axial rotational control during the first stage of orthodontic treatment : An in-vitro study
대한치과교정학회지
2019 .01
-
Evaluation of the alignment efficiency of nickeltitanium and copper-nickel-titanium archwires in patients undergoing orthodontic treatment over a 12-week period : A single-center, randomized controlled clinical trial
대한치과교정학회지
2018 .05
-
Surgery for subaxial cervical spine injuries: which is better: anterior, posterior, or anterior–posterior combined approach?: a systematic review and meta-analysis
Asian Spine Journal
2024 .08
-
기능에서 신체분절의 협응과 기여
PNF and movement
2017 .01
-
A comparative study of frictional force in self-ligating brackets according to the bracket-archwire angulation, bracket material, and wire type
대한치과교정학회지
2015 .01
-
Survival Rates and Risk Factors for Cephalad and L5-S1 Adjacent Segment Degeneration after L5 Floating Lumbar Fusion : A Minimum 2-Year Follow-Up
대한신경외과학회지
2015 .01
-
3D 프린팅법으로 제조한 티타늄 시편의 물성 평가
대한치과재료학회지
2016 .03
-
Morphometric Study of the Anterior Thalamoperforating Arteries
대한신경외과학회지
2015 .01
-
Effects of Heat Treatment on Mechanical Properties of Stainless Steel Wire
International Journal of Clinical Preventive Dentistry
2017 .01
-
Effect of Coloring Agent on the Strength and Transmittance of Dental Zirconia Block
International Journal of Clinical Preventive Dentistry
2017 .01
-
치과용 초음파 수술기의 이송속도 및 시편형상이 절삭반력과 표면거칠기에 미치는 영향
의공학회지
2023 .04
-
ST segment
International Journal of Arrhythmia
2017 .06
-
Mono-segment (segment 2) donor hepatectomy for pediatric liver transplantation
Annals of Hepato-Biliary-Pancreatic Surgery
2021 .12
이 논문의 저자 정보
최근 본 자료
댓글(0)
0