지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.17 No.2
- 발행연도
- 2023.3
- 수록면
- 269 - 290 (22page)
이용수
초록· 키워드
오류제보하기
Concrete-filled steel tube (CFST) columns are widely used in civil engineering because of their excellent bearing capacity; however, the reinforcement of CFST columns lacks effective measures. To strengthen CFST columns quickly and effectively, two methods, namely, winding FRP (fiber reinforced polymer) or steel strips, were explored in this work. Two unconfined CFST columns, eight FRP-strengthened CFST columns and four welded steel strip-strengthened CFST columns were manufactured and tested. The failure modes and axial load–strain curves of all specimens under compression load were concluded and compared. The effects of the primary parameters, such as FRP layers (1, 2, 3 and 4 layers) and steel strip thickness (3.0 and 6.0 mm), on the bearing capacity and deformation capacity were also investigated. The ultimate load of CFST columns increased from 28.72 to 64.16% after being confined by FRP with one to four layers. The ultimate load of the welded steel strip-strengthened CFST column with 3.0 mm steel strips and 6.0 mm steel strips increased by 28.46% and 49.82%, respectively, compared with the unconfined CFST column. Thus, the increase in FRP layers and steel strip thickness can markedly improve the compressive behavior of the FRP/welded steel strip-strengthened CFST columns. The cost performance of the two different reinforcement methods also showed that the cost of the welded steel strip-strengthened CFST column is nearly 40% of that of the FRP-strengthened CFST column when the same strengthening effect was obtained, which indicated that the welded steel strip-strengthened CFST column is more cost-efficient than CFST columns confined by FRP. Finally, six existing models for the ultimate load of FRP-strengthened CFST columns were presented and evaluated. From the evaluation results, the Zhang et al.’s model, Lu et al.’s model and Hu et al.’s model for FRP-strengthened CFST columns were shown to provide the best applicability and accuracy. Based on the Mander et al.’s model, a model for the ultimate load of welded steel strip-strengthened CFST columns was proposed and evaluated. The proposed model can accurately predict the ultimate load of welded steel strip-strengthened CFST columns.
목차
Abstract
1 Introduction
2 Experimental Program
3 Results and Discussion
4 Model for Ultimate Load of FRP/Welded Steel Strip‑Strengthened CFST Columns
5 Conclusions
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Numerical Response of Concrete‑Filled Steel Tubular (CFST) Columns Externally Strengthened with FRP Composites Subjected to Cyclic Loading
International Journal of Concrete Structures and Materials
2025 .03
-
개선된 부착슬립 모델을 적용한 부분 CFST 기둥의 수치해석
한국전산구조공학회논문집
2020 .01
-
Experimental study on circular CFST short columns with intermittently welded stiffeners
Steel and Composite Structures, An International Journal
2018 .01
-
Square CFST columns under cyclic load and acid rain attack: Experiments
Steel and Composite Structures, An International Journal
2019 .01
-
An approach for partial strengthening of circular RC columns using outer steel tube
Steel and Composite Structures, An International Journal
2021 .01
-
Axial behavior of RC column strengthened with SM-CFST
Steel and Composite Structures, An International Journal
2022 .06
-
Buckling resistance of axially loaded square concrete-filled double steel tubular columns
Steel and Composite Structures, An International Journal
2022 .06
-
Behavior of stiffened and unstiffened CFT under concentric loading, An experimental study
Steel and Composite Structures, An International Journal
2019 .01
-
The effect of fiber reinforcement on behavior of Concrete-Filled Steel Tube Section (CFST) under transverse impact: Experimentally and numerically
Structural Engineering and Mechanics, An Int＇l Journal
2022 .04
-
Analysis and design of demountable circular CFST column-base connections
Steel and Composite Structures, An International Journal
2018 .01
-
Strength prediction of corrosion reinforced concrete columns strengthened with concrete filled steel tube under axial compression
Steel and Composite Structures, An International Journal
2020 .01
-
Behavior of composite CFST beam-steel column joints
Steel and Composite Structures, An International Journal
2019 .01
-
Multivariate adaptive regression spline for predicting the ultimate bearing capacity of circular CFST columns
한국콘크리트학회 학술대회 논문집
2019 .10
-
Statistical-based evaluation of design codes for circular concrete-filled steel tube columns
Steel and Composite Structures, An International Journal
2015 .01
-
Experimental study on the compression of concrete filled steel tubular latticed columns with variable cross section
Steel and Composite Structures, An International Journal
2016 .01
-
Analytical post-heating behavior of concrete-filled steel tubular columns containing tire rubber
Computers and Concrete, An International Journal
2020 .01
-
Numerical study of concrete-encased CFST under preload followed by sustained service load
Steel and Composite Structures, An International Journal
2020 .01
-
Ultimate capacity prediction of eccentric loaded CFST columns using MARS method
한국콘크리트학회 학술대회 논문집
2019 .05
-
시공성을 향상시킨 용접조립 각형 CFT 편심 장주의 P-M 관계
복합신소재구조학회논문집
2015 .01
-
Seismic behavior of cross-shaped concrete-filled steel tubular columns
Steel and Composite Structures, An International Journal
2021 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2023-532-000441886